Guide

Valley flashing code: open and closed valleys

Short answer

Valley linings must be installed per the manufacturer before the shingles (IRC R905.2.8.2). Open valleys use corrosion-resistant metal at least 24 inches wide; closed (woven or closed-cut) valleys need a 36-inch-wide lining such as smooth roll roofing or a self-adhering polymer-modified bitumen underlayment (ASTM D1970).

Open valleys

Lined with metal at least 24 inches wide (gauge per the code table) or with two plies of mineral-surfaced roll roofing in the widths the code gives.

Closed valleys

A lining at least 36 inches wide: smooth roll roofing to the listed standards, the open-valley materials, or a self-adhering polymer-modified bitumen underlayment complying with ASTM D1970.

Quantity

Valley length (LF) from the measurement report. For a 36-inch membrane lining: length × 3 ft = square feet. Photograph each valley before and during tear-off.

Codes are adopted by states, counties and cities, often with amendments. The edition and amendments adopted where the house stands are what count – section numbers here follow the 2021 IRC model code. This guide is general information, not legal advice.

Sources

Let us document it for every job

Roofpol Unlimited: line items, quantities and the code and manufacturer support – $1,000 a month, unlimited, 3 test cases free.

Start 3 free cases See a sample package

Related

Start 3 free cases