Guide

Starter strip: eaves, rakes and the installation sheet

Short answer

The IRC requires roof coverings to be installed per the manufacturer’s instructions (R905.1). Shingle manufacturers call for a starter course at the eaves; many also call for starter at the rakes, often tied to wind warranties. The product’s installation sheet decides.

Why the installation sheet matters

IRC R905.1 requires roof coverings to be applied according to the code and the manufacturer’s installation instructions. That makes the starter requirement of the installed shingle line part of a code-compliant installation.

Eaves and rakes

Starter at the eaves is standard for laminated and three-tab shingles. Starter at the rakes depends on the product line and the warranty level. In an estimate, count eaves only (LF) unless the sheet calls for rakes; then eaves + rakes. Inverted shingles or cut tabs are not the same product as a dedicated starter strip – photograph the first course.

What to attach

The page of the installation instructions that shows the starter course, for the exact product installed or specified.

Codes are adopted by states, counties and cities, often with amendments. The edition and amendments adopted where the house stands are what count – section numbers here follow the 2021 IRC model code. This guide is general information, not legal advice.

Sources

Let us document it for every job

Roofpol Unlimited: line items, quantities and the code and manufacturer support – $1,000 a month, unlimited, 3 test cases free.

Start 3 free cases See a sample package

Related

Start 3 free cases